Battery Replacement Guide for Milesight AM102 and Dragino LHT65 Sensors

This guide explains which batteries to use to replace batteries for Milesight AM102 Ambiance Monitoring Sensor and  and Dragino LHT65 sensors

1. Milesight AM102 Ambiance Monitoring Sensor

Required Batteries:

• 2 × ER14505 Li-SOCl₂ batteries

2. Dragino LHT65 Sensor

Required Battery:

• 1 × CR17450 Lithium 3V battery

When battery is low, replace the 3V CR17450 battery.

Remove the two screws from the back of the sensor, remove the battery cover and replace the battery. Screw the battery cover back to the device. Activate the sensor once your new battery is inserted.